Browse product categories

RSA-1 heavy-duty metal road stud with shank

Name: RSA-1 heavy-duty metal road stud with shank
SKU: RSA-1

Heavy-duty aluminium road stud for demanding applications, tested by SABS to SANS 1442:2008.

Product code RSA-1

R100.00 excluding VAT

Construction: Aluminium composite stud with metal shank
Shell: Aluminium
Filling: High-density plastic resin (HDP)
Lens: PMMA acrylic
Shank length / diameter: 50 mm / 24 mm
Stud width / length / height: 125 mm / 90 mm / 22.7 mm

Technical documents (4)

Include your quantity and site requirements in your enquiry so our team can confirm the supply or installation details.

Product information

The RSA-1 is a heavy-duty aluminium road stud designed for demanding applications. Introduced in 2012 as an upgrade to the KT-303, it was tested by SABS and passed SANS 1442:2008, edition 1.3.

Materials and dimensions

Specification	Details
Construction	Aluminium composite stud with metal shank
Shell	Aluminium
Filling	High-density plastic resin (HDP)
Lens	PMMA acrylic
Shank length / diameter	50 mm / 24 mm
Stud width / length / height	125 mm / 90 mm / 22.7 mm
Stud weight	252.1 g

Packing and shipping

Specification	Details
Box quantity	40 studs
Box weight	13.7 kg
Box dimensions (L × W × H)	48 × 29 × 23 cm
Pallet quantity	1,600 studs
Pallet dimensions (L × W × H)	110 × 110 × 127 cm
Pallet weight	568 kg

Installation requirements

Use approved epoxy and follow the current model-specific installation instructions. Drill an installation hole 24 mm in diameter and 65 mm deep.

Installation and site preparation

Ensure your work environment is safe and measures are in place to keep traffic away from your work crew and ensure the safety of yourself and your workers
Identify and mark installation position, ensure installation position is according to the road authority standards, improper placement of road studs can cause confusion to drivers and lead to accidents
Drill hole in asphalt on marked position at least 24mm dia x 65mm deep (a 26mm SDS Max drill bit is advisable)
Ensure hole is clean and dry and free of any debris, any obstruction in the hole will hamper the proper and secure installation of the road stud, any oil or other chemicals on the road surface with prevent epoxy resin glue from adhering properly
Mix two part epoxy resin glue (open both containers in the kit, add the small tubby to the big one - properly mix inside the big tub), and place enough epoxy onto hole, push shank of stud through epoxy glue into hole ensuring enough epoxy to completely cover underside of stud and secure the shank in the hole, always use gloves when working with epoxy resin
Align the stud properly so lens face oncoming traffic, wrong alignment of the road stud will look real bad and minimize the effectiveness of the retro reflective lens
Scrape away any extra epoxy glue and return to glue pot for later use, take care not to get any epoxy glue onto stud lens
Inspect Installation to ensure quality workmanship
Protect stud from traffic until epoxy glue is dry, this will take about one hour depending on the ambient temperature and type of epoxy glue used
Always: Work safe, Work accurate, Work fast